Will a Cigar Shop Repair a Cigar Humidor or a Lighter?
If you are “into” cigar smoking, it is pretty likely that you own at least one cigar humidor. It is also quite likely that you have a good relationship with at least one cigar store too. Have you considered if that relationship is as valuable to you as it is to the vendor? For instance, if you have purchased cigars and the accessories needed to properly enjoy them, ask yourself if the seller can make the kinds of repairs that such expensive goods often need.
The thing to consider when you make any investment, however, is if the vendor is going to be able to help you out with repairs if something goes wrong. For instance, will the seller make it easy to get a new liner for the humidor? Will they offer repairs on a lighter that has cost you a bit of money? These are things to consider before you begin shopping regularly at any cigar store or specialty vendor.
Okay, so we can understand why not all cigar vendors can offer repairs on cigar accessories, but the next question of concern is why there would be a need for repairs in the first place. After all, aren’t accessories usually limited to things like cutters, humidors, and lighters that won’t often break? The answer is a resounding yes, but also a quiet no as well. While the accessories mentioned are durable, most of them actually do eventually break or malfunction in some way. Rather than risking further harming them, it is best to just find a good repair service.
First of all, that humidor is going to be designed to have a replaceable liner. While the exterior of the case is meant as a “one time” expense and should be selected according to your decor or preferences, the cedar lining is a relatively “living” thing. Remember that it is a material that is meant to absorb water and humidity, and this means that it might eventually warp or simply lose its absorbency. This doesn’t happen in one year, and it may not even happen in four or five years, but it will eventually require a replacement. If your cigar shop does not make repairs or offer service on accessories…look somewhere else.
As to the lighter, it is an object that will most certainly require support and at a pace that will seem almost instant when compared to a humidor. Remember, however, that your lighter uses fuel, flints, and is handled and put to work frequently. This means that it is only natural that the thing will face a lot of wear and tear, and even some damage. You must never think that you can repair a lighter on your own because that can lead to serious damage and harm. Most cigar smokers like to own a high quality lighter, so be sure that your cigar shop can offer repairs when something eventually happens to your costly accessory.
Harrison is a product reviewer of cigar lighters and has done vast amounts of research on cigar accessories including blue rhino lighters.
Can I Use a Cedar Strip to Light a Cigar?
Many cigar purists believe that cedar strips are the only way to light a cigar while ensuring the cleanest flavor. Some even say that the cedar adds a pleasant flavor. Others believe that using cedar strips adds an unnecessary step to the smoking process. These smokers prefer to stick with regular cigar lighters. If you’d like to see if cedar strips work well for you, you’ll be happy to discover that using them is fairly easy.
First, using cedar ensures that there are no chemicals that make their way into your smoke. Lighter fluid (other than butane) can cause some very off tastes and smells in your smoke. Matches can also cause problems if you don’t let them burn past the head. Using cedar also adds a nice scent to the cigar – an infusion of cedar, as it were. Using cedar strips to light your cigar is not particularly difficult to do, though you’ll have to follow some pretty specific steps.
You will first need to find somewhere out of the wind where you can light your cedar. It’s very easy to put out burning cedar, so opt for somewhere protected. Next, you’ll need a way to light the cedar. Many people choose to use candles for this purpose, but you will need to make sure that you use an unscented candle. You can also use a match, but make sure that you let it burn past the head so no sulfur smell gets into your cigar.
Fortunately, you can still have a fantastic smoking experience using high quality lighters that are designed specifically for cigar aficionados. Butane torch lighters are an excellent option and are great for creating even flames. You will discover that there are many classy looking lighters that are easy to carry around for any occasion.
A great part of the enjoyment of cigar smoking is experimenting with different accessories. Give cedar strips a try and decide for yourself if they are worth the extra effort. They burn quickly and provide a great flame that is ideal for lighting cigars. You may find yourself pleased with this classic method for lighting your favorite cigars.
Drew is a consultant for an online specialty cigar lighters store and has expert knowledge of cigar accessories, including zippo blu lighters.
When Would I Need a Butane Torch Lighter?
If you are a smoker or enjoy camping or barbecuing, then you likely own one or more lighters. If you have ever been to a smoke shop or even browsed the lighters section of any sporting goods store, you have likely noticed that there are many different options available to you, from disposable lighters to Zippos, butane torches, and more. What exactly is a butane torch lighter, and how does it differ from all of the other options on offer? What makes it more unique or desirable than any of the other lighters out there?
While most lighters work using flint to create a spark, a butane torch style lighter instead relies on piezoelectricity, which creates a spark by using a small hammer to strike a piece of quartz. One of the unique properties of quartz is that it generates voltage whenever it is deformed. The impact from the hammer creates a change in the mineral that is just enough to generate a tiny spark, igniting the butane that the lighter emits and resulting in a consistent and steady flame.
With a butane torch style lighter, you get a flame that is very hard to extinguish. This is great in both wind and rain, as well as when you need sustained heat to get a fire going. The lighters are also very popular among cigar and cigarette smokers, giving an even light and not adding any taste to the cigar. You will also find that the sheer number of sizes and styles that these lighters come in helps to increase their appeal, and many offer adjustable flames and other settings to help make them ideal for almost any situation or scenario.
With a butane torch style lighter, you also have the added benefit of not needing to replace it every time the fluid runs out. Unlike disposable lighters, all you have to do when this occurs is simply use a can of butane, which can be found at very low prices in most convenience and grocery stores, to refill the lighter. The process takes about five to ten seconds and can save you a lot of money in the long run.
In short, these lighters are considerably different from the other options on the market. They burn much hotter and much more consistently. For many people, they are the perfect option and are well worth considering.
Drew is a consultant for an online specialty cigar lighters store and has expert knowledge of cigar accessories, including lighters.
Will a Submerged Torch Lighter Still Work?
A torch lighter, fortunately, is usually a sturdy little device. They have almost no moving parts in them, which ensures that they don’t wear out very quickly. And, yes, they can hold up to being submerged in water. The important thing to remember is that you want to make sure that the torch is dry before you try to light it again.
The most important thing to do is to take the lighter and dry it off as much as possible right away. If it has a case that you can take apart, take it down to its component parts and leave them all out to dry individually. This allows them to dry out and ensures that they won’t corrode because of having become wet.
Some lighters have electric ignitions on them. These are a particular concern, for obvious reasons. If your lighter has become wet and it activates electronically, you need to make sure that these components are thoroughly dried out before you use them again. Not doing so can cause a short. Give it at least 24 hours to dry out.
If you have a flint and wheel igniter, you just have to wait for them to dry off enough to produce spark, which usually only takes less than an hour. If the lighter refuses to light after it has had plenty of time to dry out, take apart the flint mechanism and shake it out to get rid of any excess moisture. Usually, however, this won’t be a problem at all and the flint will start sparking after a few turns of the wheel. The heat it produces on its own is usually enough to get any excess water burned off of it fairly quickly.
If you find a lot of water in your lighter, you may want to take a can of compressed air can blow it out a bit. You can do this a few times to make sure that you get any standing water out of the cracks and crevices in the lighter and then leave it sit for a while so that the remaining water can evaporate. If the lighter seems unwilling to produce a spark at all and it has a battery-activated mechanism, check to see if the battery simply went dead. Sometimes, being submerged in water will cause the battery to short out and discharge. Most of the time, the worst you have to do is replace the battery to get it working again just the way it was before.
Wendy is a consultant for a specialty cigar lighterss store and has expert knowledge of butane accessories, including lotus lighters.